Current Price of 20 foot size 6 Rebar

The Price of a 20' Size 6 Grade 60 Rebar Stick is approximately $27.45 USD as of 2025-04-02

The Math / Science

The Price of Steel in the US as of 2025-04-02 is $438.92 USD/t  (U.S. dollar per metric ton).  A 20' grade 60 size 6 rebar stick weighs approximately 30.1 pounds.

The formula for the price of a 20 foot Size 6 rebar stick is:

sP =  sW*dpmt*MKUP

where:

• sP = 20' size 6 stick price
• sW = Stick Weight of 30.1 pounds
• dpmt = Dollars per Metric Ton ($438.92 USD/t)
• MKUP = markup factor from price of raw steel to manufactured rebar

General Rebar Information

Rebar is short for reinforcing bar.  Rebar is a roughly circular steel bar with ribs used to provide added tensile strength to concrete structures.  Rebar is put in place before concrete is poured.  When the concrete has hardened, the concrete around the rebar ribs keep the rebar in place.  Rebar and concrete expand similarly with temperature variations.  This all has the net result of substantially added tensile strength when rebar is part of the concrete form.  Carbon steel is the most commonly used material for rebar, which may also be coated with zinc or epoxy resin.

Rebar is laid out in grids, crisscrossed patterns of rebar, tied at the intersections where runs of rebar touch.  The grids have spacing between the rebar rows, and they are placed within the concrete form by a specified inset from the edge of the concrete.  Multiple parallel grids, at uniform space intervals, are referred to as rebar mats.  

Rebar Terms

• Rebar - reinforcing steel bar.
• Stick - one length of rebar.  In the U.S., the most common lengths of rebar sticks are 20', 40' and 60'.
• Lapping - when two sticks of rebar are overlapped and bound together.
• Lapping Factor - the multiple of a rebar diameter used to specify appropriate rebar lapping length.
• Mat - a crisscross grid of rebar sticks.  There may be more than one mat with space in between mats.
• Size - the indicator of the diameter of rebar sticks.  Note: guage is not a correct term for rebar.

Rebar Size

In the United States, rebar sizes are in increments of 1/8^th inches in diameter.  Therefore, size 4 is 4/8^th of an inch, which is 1/2", and size 8 is a full inch in diameter.  Based on this and the density of steel used in rebar, the Rebar Size Table contains reasonably accurate specifications of rebar linear weight and lateral (face) area based on rebar size.

Rebar Lapping

The most common lengths of pre-cut rebar in the United States are 20`, 40' and 60'.  These are known as rebar sticks.  When the dimensions of a slab, wall or other form exceed the length of a single stick of rebar, it is required to overlap and tie rebar pieces to create the added length.  This process is called lapping, and the length of the overlapping rebar is the rebar lapping length.  The length of the lap is specified by a "Lapping Factor (LF)" which is often 40 or 60 times the diameter of the rebar. Engineering specifications of a lapping factor should always be applied.

Rebar Tools

A class of rebar tools, both powered and manual, have been developed to aid construction workers in working with rebar.  These include the following:

• Rebar Cutters are used to cleanly and safely cut sections of rebar.
• Rebar Benders are used to bend rebar sticks precisely to fit into concrete forms.
• Rebar Tiers are used to tie rebar grid intersections and for rebar lapping.