Travel Time between Coordinates

vCalc Reviewed

`t = (f(( lat_2 - lat_1 ) and ( lon_2 - lon_1 ))) / "v" `

`(lat_1)"Starting Latitude"`

`(lon_1)"Stating Longitude"`

`(lat_2)"Ending Latitude"`

`(lon_2)"Ending Longitude"`

`(V) "Average Speed"`

The Math / Science

The Haversine Travel Time calculator uses the Haversine equation to compute the distance between two points (x and y) on the Earth. It then uses a mean velocity (speed) to calculate the time necessary to travel between the two points on the globe.
The time of travel is calculated by dividing the distance traveled by the average velocity. This formula allows the user to enter two points on the globe in latitude and longitude, and a speed. This formula uses the Haversine formula to approximate the distance between the two points. The Haversine formula is based on a spherical earth model employing the Earths mean radius.

Example

This formula will provide a fairly accurate estimate on the amount of time it would take a tsunami to travel between two points. The velocity of a tsunami is reported to be 500 miles per hours when in deep water (See U.S. Gov Report).

Navigation Calculators:

Haversine Distance (decimal degrees): Compute the Distance Between two Points on the Earth (Great Circle Arc)
Haversine Distance (Degrees, Minutes and Seconds): Compute the Distance Between two Points on a Sphere (Great Circle Arc) using degrees, minutes and seconds verses decimal degrees.
Rhumb Line Azimuth: Computes the azimuth heading one can navigate for a path that crosses all meridians of longitude at a constant angle.
Rhumb Line Distance: Computes the distance traveled between two points on the globe if traveled via a rhumb line.
Travel Time between Coordinates: Compute the time to travel between two location (latitudes and longitudes) based on a average speed.
Navigation Speed: Computes the required average speed needed to go between coordinates on a great circle arc within a given amount of time.
Distance to Sea Level Horizon: Computes the distance to the sea horizon at an altitude
Correction Angle: navigation equation that compensates for air or water currents.
Distance to Sea Level Horizon: Compute the distance to the horizon based on a height above the orb using a spherical Earth model.
Decimal Degrees: Compute decimal degree angles from degrees, minutes and seconds,[CLICK HERE].

Great Circle Calculators

Flight and Navigation Calculators

Correction Angle: Computes the navigation angle/azimuth correction angle using the wind speed, wind direction, flight heading and an Air Speed.
Ground Speed: Computes the ground speed based on the wind speed, wind direction, a Flight Heading and an Air Speed.
Haversine - Distance: Computes the distance between two points on a spherical model of the Earth along a great circle arc. This also includes the rhumb line distance and azimuth for the rhumb line.
Travel Time between Coordinates: Computes the time to travel between to points on the globe in a great circle arc at an average velocity.
Distance to Sea Level Horizon at Altitude: Computes the distance to the horizon from a specified height using a spherical model the mean spherical radius of the Earth
Force of Drag: Calculates the resisting force of drag on an object flowing through a medium (e.g. air).
Force of Lift: Computes the lifting force on the surface area of a wing based on the wing surface area, air flow velocity, density of air and a lift coefficient.
Lift Coefficient: Compute the lift coefficient of a wing based on lift force, wing surface area, wind speed and density of air.
Velocity Needed for Takeoff: Computes the velocity required to create more lift than the weight of an aircraft or watercraft using a wing (e.g. hydrofoil).
Glide Ratio: Computes the glide ratio based on the change in forward distance and the change in altitude.
Wing Surface Area: Computes the wing surface area required to achieve lift, base on a lift coefficient, lift force, wind speed and density of air.
Velocity of Air over the Wing: Computes the velocity required to achieve a lift, based on lift coefficient, lift force, wing surface area and density of air.
Air Speed from Pressures: It uses the Bernoulli Equation to estimate air speed based on the total Pressure measured by a pilot tube, total Static local atmospheric pressure and the Density of Air.
Center of Mass: Computes the vehicle center of mass between two loads (masses).