Antoine Equation

`p = 10^(A - B/(C+T))`

`(T)"Temperature"`

`(A)"Coefficient A"`

`(B)"Coefficient B"`

`(C)"Coefficient C"`

The Math / Science

The Antoine Equation is a mathematical expression used to describe the vapor pressure of a substance as a function of temperature. It is named after the French chemist Louis-Camille Antoine who proposed the equation. The general form of the Antoine Equation is:

log10(P)=A−T+CB

Where:

P is the vapor pressure of the substance.
T is the temperature in degrees Celsius.
A, B, and C are constants specific to the substance.

The Antoine Equation is particularly useful in the field of thermodynamics and chemical engineering, especially when dealing with volatile substances. It is commonly employed for estimating vapor pressures, which is crucial in various applications such as:

Process Design: In designing chemical processes involving distillation or evaporation, knowledge of vapor pressures at different temperatures is essential for determining optimal conditions.
Safety: Understanding the vapor pressure of a substance helps in assessing its potential for evaporation and the associated safety concerns, especially in handling volatile chemicals.
Material Compatibility: For selecting materials and designing equipment that will come into contact with substances having significant vapor pressures.
Calibration of Instruments: In some cases, the Antoine Equation can be used to calibrate instruments that measure vapor pressures.

It's important to note that the accuracy of predictions using the Antoine Equation depends on the availability and accuracy of the constants AA, BB, and CC for the specific substance of interest. These constants are typically determined experimentally and may vary for different substances.

The form of the Antoine Equation used in this calculator is:

p = 10^{(A - B/(C+T))}

where:

p = vapor pressure
T = temperature
A, B, C are the Antoine Equation Coefficients

For the convenience of the user, unit conversions are supported. Temperatures are converted to degree Celsius. The coefficients are converted to millimeters of mercury (mmHg).

Wikipedia provides the following Coefficient examples

Note from the math programmer: The inconsistency of the units in the formula is maddening. The wikipedia article indicates that the coefficients, presumably A, B and C, are in mmHg. Algebraically, these do not cancel out. For this reason, we take the article at face value, convert to degrees Celsius for the temperature and millimeters of mercury for the coefficients and then eliminate the units, treating the values as merely real numbers. The ultimate value in the equation (p) is then espoused to be a pressure in the units of millimeters of mercury. Any insight into this is very welcome, via the comments section, and changes will be made if this is in anyway incorrect.

The Water-Steam Equilibrium Vapor Calculator provides the constants A,B and C within the appropriate temperature ranges of the water vapor.

References

Wikipedia - en.wikipedia.org/wiki/Antoine_equation

Weather (Meteorology) Calculators

Heat Index: Approximates the heat index based on the temperature and relative humidity
Canadian Humidity Index (HUMIDEX): Computes the Canadian Humidity Index (HUMIDEX) based on the dry-bulb ambient temperature and the dew-point temperature.
Australian Apparent Temperature (AT): Computes the apparent temperature based on the dry ambient temperature, the relative humidity and the wind speed at ten meters.
Relative Humidity: Computes the relative humidity based on the actual density of vapor and the saturated density.
Dew Point from Relative Humidity: Computes the dew point based on the relative humidity and ambient temperature.
Summer Simmer Index: Computes the Summer Simmer Index based on the air temperature and relative humidity.
Wind Chill Index (North America): Computes the wind chill index based on the air temperature and the velocity of the wind.
Wet-Bulb Globe Temperature (WBGT): Computes the wet-bulb globe temperature index based on dry-bulb (air) temperature, globe thermometer temperature and the wet-bulb temperature.
Humature Index: Estimates the humidity index based on the temperature and dew point.
Antoine Equation: Computes the apparent vapor pressure of pure substances based on temperature and coefficients for the substance.
Barometric Formula (Tropospheric) calculator computes the normal barometric pressure based on the altitude (h) using the Exponential Atmosphere formula.
Planetary Temperature: Estimates a planet's temperature based on the luminosity of its star, distance to the star, average albedo and infrared optical depth of atmosphere.
Snow Water Equivalent (SWE): Computes the volume of liquid water contained in rain or snow pack defined by area, depth and snow type or rain.