The Corrugated Metal Panel Paint or Coating Volume calculator computes the amount of paint or other coating (e.g., spray insulation) on an area of corrugated panels.
INSTRUCTIONS: Choose units and enter the following:
- (L) Length
- (W) Width
- (cF) Corrugation Factor
- (t) Thickness of Coating
- 10 mils for industrial paint
- 6 mils for powder coating
- 2 to 3 inches for spray insulation
Corrugated Panel Coating (CPC): The calculator returns the following:
- (SA) Apparent Surface Area
- (cSA) Corrugated Surface Area. This takes into account the corrugation.
- (V) Volume of Coating Material (e.g., paint)
The above can be automatically converted into compatible units via the pull-down menu.
The Math / Science
The calculator assumes that the face of the surface is rectangular with corrugation in one direction, along the width:
SA = L * W * CF
where:
- (SA) Apparent Surface Area
- (L) Length of Area
- (W) Width of Area
- (CF) Corrugation Factor
With the Surface Area (SA), calculation of the volume is simply:
V = SA * t
where:
- (V) Volume of Coating
- (t) Thickness of Coating
Corrugation Factor
Surface area is a simple length times width calculation, but what if one of the dimensions is not smooth? This is found in corrugated material. To account for this, this calculator has a corrugation factor that is applied to the length and width dimensions to account for corrugation.
Straight (Squared) Corrugation Profile
Curved Corrugation Profile:
Corrugation refers to the process of shaping a material into a series of parallel ridges and grooves. This is commonly seen in corrugated materials, such as cardboard or metal sheets. The purpose of corrugation is often to add strength and rigidity to the material while maintaining flexibility. In the case of corrugated cardboard, for example, the corrugated structure provides strength and helps the material withstand pressure and impacts. Corrugated metal sheets are used in roofing and packaging for similar reasons.
To calculate the Corrugation Factor, do the following:
- Measure the linear Width (W in the diagram above), for any length of the corrugation.
- Use a string, and lay it on top of the same length, letting is fall into all the recesses as much as possible.
- Mark the end of the string to match the end of the Width.
- Pull the string straight and measure how much longer it is than the Width.
The formula for the Corrugation Factor is:
CF = SL / W
where:
- CF = Corrugation Factor
- SL = String Length
- W = Width of Corrugated Segment
Corrugation
Corrugation refers to the process of shaping a material into a series of parallel ridges and grooves. This is commonly seen in corrugated materials, such as cardboard or metal sheets. The purpose of corrugation is often to add strength and rigidity to the material while maintaining flexibility. In the case of corrugated cardboard, for example, the corrugated structure provides strength and helps the material withstand pressure and impacts. Corrugated metal sheets are used in roofing and packaging for similar reasons.
Corrugation Factor (CF) that can by applied to a dimension (e.g., width) in order to make an accurate surface area of a corrugated surface calculation.
Corrugation can have a smooth (curved) or straight segment pattern with squared ends in its profile.
