Weight of Water in a Pipe

Processing...

The Weight of Water in a Pipe calculator computes the weight or mass (M) of the contents of a section of a pipe based on the interior diameter (d) of /attachments/b6e6d4cd-2570-11e5-a3bb-bc764e2038f2/pipe.png circular conduit or pipe, the length (l) of the pipe and a (μD)mean density of its contents. The default mean density is for water.

INSTRUCTIONS: Choose units and enter the following:

(d) Inner diameter of the pipe.
(l) Length of the pipe.
(μD) Mean density of contents (default pure water)

Weight or Mass of the Contents of a Pipe (W): The calculator returns the weight in pounds. However, this can be automatically converted to compatible units (e.g. kilograms) via the pull-down menu.

The Math / Science

The equation for the volume of a pipe is:

M =π⋅(d/2)²⋅l⋅mD

where:

M is the mass or weight of the contents of a pipe
d is the inner diameter
l is the length of pipe.
mD is the mean density of the contents of the pipe.

For the mean density of other substances, you can use the mean density lookup function by CLICKING HERE. With other mean densities, the user can calculate the content weight of a pipe containing fluids such as diesel fuel, alcohol or sludge.

Mean Density (μD) of Common Substances

1,000 kg/m³ - Pure Water
1,022 kg/m³ - Sea water
1,037 kg/m³ - Milk
860 kg/m³ - Olive Oil
885 kg/m³ - Diesel Fuel
870 - 920 kg/m³ - Crude Oil
890 kg/m³ - Fuel Oil
789 kg/m³ - Ethanol
737 kg/m³ - Gasoline (petrol)
1,442 kg/m³ - Cement Slurry

Plumbing Calculators

Rolling Offsets (Run and Travel) – The Rolling Offset Rolling Offset Lengths Pipe Grading function computes the run and travel length a rolling offset based on the offsets and fittings. (see diagram).
Pipe Grading - Compute the drop needed over a run to maintain a grade (e.g., 4" over 12')
Diagonal of a Square - This is a simple calculation to assist in computing the diagonal of a square.
Diagonal of a Box - This computes the length of the diagonal of a box (T) based on sides of length R, S and U.
Flow Rate - This computes flow rate based on the total volume and the time it took to accumulate.
Pipe Flow Volume - This computes the total volume from a pipe based on the flow rated and the duration of flow.
Weight of Water in a Tank - Computes the weight of water in a cylindrical tank based on the radius and height (or length).
Weight of Water in a Pipe - Computes the weight of water or other substances in a pipe based on the dimension and material density.
Weight of Sea Water in pipe - Computes the weight of sea water in a cylinder based on the radius and height (or length)
Pressure Head - The Potential Gravity-Fed Water Pressure from a Tank (a.k.a. Pressure Head) based on the height of storage.
Pipe Volume - Computes the volume in a pipe.
Pipe Surface Area - Computes the surface area of a pipe.
Pipe Coating Amount - Computes the volume of coating material for a pipe such as paint, polyethylene, polyurethane, zinc, bitumen, FBE or mortar.
Volume of Water in a Tank (e.g. hot water tanks),
Volume of a Spherical Container
Weight of Water in a Spherical Container
Volume of Water in Rectangular Tank
Weight of Water in a Rectangular Tank
Capillary Rise - The height of water in a small tube due to capillary force.
Snow Water Equivalence - The volume of water created by an area and depth of snow.
Pore Water Pressure - Pressure of uplift from the water table.
Pipe Stress Budget - Computes the pressure that a pipe can withstand based on the allowable stress, wall thickness and outside diameter.
Water in Basement Volume: Computes the volume of water in an area such as a basement based on the dimensions and the time required to pump it out based on a sump pump rate.
Paint for Pipes: Computes the amount of paint needed to cover the exterior surface area of one or more pipes based on the pipe diameter, length, number of coats, number of pipes and the recommended area coverage of the paint.

Pumping Calculators

Volume Pumped over time by Pump Flow-rate
Time to Pump Volume by Flow-rate
Duplex Pump Output: Barrels per stroke from a duplex pump.
Triplex Pump Output: Barrels per stroke from a triplex pump.
Quintuplex Pump Output: Barrels per stroke from a quintuplex pump.
Barrel Production: Computes the total volume (barrels) produced over a period of time based on the production rate and duration.
Annular Velocity: Compute the fluid flow velocity, based on the flow rate and pipe dimensions.
Mud Buoyancy: Computes the buoyancy in mud
Volume of a Pipe: Computes the volume of a pipe.
Weight of Pipe Contents: Computes the weight (mass) based on density and pipe dimensions.
Density of Oil:
- Crude at (48° API): 790.0 kg/m³
- Crude at (40° API): 825.0 kg/m³
- Crude at (35.6° API): 847.0 kg/m³
- Crude at (32.6° API): 862.0 kg/m³
Energy in Crude Oil: 5800000.0 BTU/bbl
Pump Efficiency