`V = pi * #r^2 * #h`

Enter a value for all fields

The Volume of Water in a Tank calculator computes the volume of water in a right circular cylinder tank.

INSTRUCTIONS: Choose units and enter the following:

• (tD) Tank Diameter
• (wD) Water Depth

Volume of Water in a Tank (V): The calculator returns the volume in gallons.  However, this can be automatically converted to many other volume units (e.g. cubic inches) via the pull-down menu. 

The Math / Science 

The formula for the volume of a cylinder is:

           V = π•r²•h

where:

• V is the volume of the cylinder
• r is the Radius of the cylinder which is half the diameter.
• h is the Height of the cylinder.

---

Plumbing Calculators

• Rolling Offsets (Run and Travel)  – The Rolling Offset Rolling Offset Lengths Pipe Grading function computes the run and travel length a rolling offset based on the offsets and fittings. (see diagram).
• Diagonal of a Square - This is a simple calculation to assist in computing the diagonal of a square.
• Diagonal of a Box - This computes the length of the diagonal of a box (T) based on sides of length R, S and U.
• Flow Rate - This computes flow rate based on the total volume and the time it took to accumulate.
• Pipe Flow Volume  - This computes the total volume from a pipe based on the flow rated and the duration of flow.
• Weight of Water in a Tank - Computes the weight of water in a cylindrical tank based on the radius and height (or length).
• Weight of Water in a Pipe - Computes the weight of water or other substances in a pipe based on the dimension and material density.
• Weight of Sea Water in pipe - Computes the weight of sea water in a cylinder based on the radius and height (or length)
• Pressure Head - The Potential Gravity-Fed Water Pressure from a Tank (a.k.a. Pressure Head) based on the height of storage.
• Pipe Volume - Computes the volume in a pipe
• Pipe Surface Area - Computes the surface area of a pipe.
• Pipe Coating Amount - Computes the volume of coating material for a pipe such as paint, polyethylene, polyurethane, zinc, bitumen, FBE or mortar.
• Pipe Grading - Compute the drop needed over a run to maintain a grade (e.g., 4" over 12')
• Volume of Water in a Tank (e.g. hot water tanks),
• Volume of a Spherical Container
• Weight of Water in a Spherical Container
• Volume of Water in Rectangular Tank 
• Weight of Water in a Rectangular Tank
• Capillary Rise - The height of water in a small tube due to capillary force.
• Snow Water Equivalence - The volume of water created by an area and depth of snow.
• Pore Water Pressure - Pressure of uplift from the water table.
• Pipe Stress Budget - Computes the pressure that a pipe can withstand based on the allowable stress, wall thickness and outside diameter.