Weight of Three and a Half Inch (3.5") EMT Conduit

The Weight of Three and a Half Inch (3 1/2") Electrical Metallic Tubing (EMT) calculator estimates the total weight of Electrical Metallic Tubing (EMT Conduit) based on the size of the conduit and the length (L).

INSTRUCTIONS: Choose units and enter the following:

• (L) Length of 3-1/2" Conduit

3 1/2" EMT Conduit Weight(w): The calculator returns the estimated weight in pounds.  However this can be automatically converted to compatible units via the pull-down menu.

The Math / Science

EMT stands for Electrical Metallic Tubing (aka thin-wall tubing).  EMT is often used as a lower cost solution to galvanized rigid conduit (GRC).  EMT is not threaded but can be used with threaded fittings via the use of clamps.  EMT is typically made of steel.

The relationship between length of conduit, size of EMT and the weight comes from industry standard numbers.  The table above is the basis of this calculator and it shows the mass / weight value of the EMT per hundred feet length.

EMT Conduit Calculators

The EMT Conduit Calculator estimates the time to install, the length installed over a set time and the weight of a specified length of Electrical Metallic Tubing (EMT Conduit).

• EMT Conduit Installation Time: Estimates the amount of time needed to install Electrical Metallic Tubing (EMT Conduit) based on the length of the conduit, the Level of Difficulty and the size of the conduit.
• EMT Conduit Length: Estimates the length of Electrical Metallic Tubing (EMT Conduit) that can be installed based on the Level of Difficulty, the size of the conduit and the amount of time allocated.
• EMT Conduit Weight: Estimates the total weight of Electrical Metallic Tubing (EMT Conduit) based on the size of the conduit (S) and the length (L).
• Rolling Offset (run and Travel): Computes the travel length of pipe or conduit between two angle fixtures and the linear advancement (run) in a rolling offset.
• Weight of Half Inch (1/2") EMT Conduit: Estimates the total weight of 1/2" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of Three Quarter inch (3/4") EMT Conduit: Estimates the total weight of 3/4" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of One Inch (1") Electrical Metallic Tubing (EMT): Estimates the total weight of 1" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of One Inch and a Quarter (1 1/4") Electrical Metallic Tubing (EMT): Estimates the total weight of 1 and 1/4" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of One Inch and a Half (1 1/2") Electrical Metallic Tubing (EMT): Estimates the total weight of 1 and 1/2" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of Two Inch (2") Electrical Metallic Tubing (EMT): Estimates the total weight of 2" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of Two Inch and a Half (2 1/2") Electrical Metallic Tubing (EMT): Estimates the total weight of 2 and 1/2" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of Three Inch (3") Electrical Metallic Tubing (EMT): Estimates the total weight of 3" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of Three and a Half Inch (3 1/2") Electrical Metallic Tubing (EMT): Estimates the total weight of 3 and 1/2" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.
• Weight of Four Inch (4") Electrical Metallic Tubing (EMT): Estimates the total weight of 4" Electrical Metallic Tubing (EMT Conduit) based on the conduit length.

Cable and Conduit Installation Calculators

• Electrical Metallic Tubing (EMT) Calculator:  This provides the installation time and length estimates and the weight of EMT conduits.
• Galvanized Rigid Conduit (GRC) Calculator: This provides the installation time and length estimates and the weight of GRC conduits.
• PVC Schedule 40 Conduit Calculator: This provides the installation time, length and weight of PVC schedule 40 conduits.
• Metal Clad (MC) Cable Calculator: This provides the installation time, length and weight of metal clad (MC) cable.
• Fiber Optic Cable Loss Budget Calculator:  Computes the acceptable dB loss in signal over a fiber-optic network based on the material type, number of connectors and splices and the overall length of the run.
• Voltage Drop Calculator:  Computes the voltage drop over a length of cable and provides the needed gauge to keep voltage drop above a threshold.
• Telecommunications Calculator: This provide network and communications functions.
• Rolling Offset: Computes the run and travel distance in a rolling offset